Page 4
For technical questions, please call 1-888-866-5797.
Item 61565
Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Opening with Code
Note:
The Safe comes preset with a code of
1. Press the numbers
on the Key Pad,
then press either the or Key.
Note:
The Yellow Light will illuminate each time a key
is pressed. If it does not, open the safe with the key,
see below, and replace the batteries, see page 7.
2. Once the Green light is on:
a. turn the Knob clockwise,
b. turn the Handle clockwise, and
c. pull the Door open.
Note:
The Knob and Handle remain unlocked only
for several seconds after inputting numbers.
Note:
Three wrong entries
will
sound an alarm
and
disable the Key Pad
for
20 seconds
.
Three additional wrong entries
will
sound an alarm
and
disable the Key Pad
for
5 minutes
.
To stop the alarm:
Open the safe
with the key
and temporarily
remove a battery
.
Yellow Light
“Proceed”
Green Light
“Ready”
Red Light
“Low Battery”
Knob
Key
Pad
Handle
Manual
Lock Cover
Figure B: Key Pad Controls
Opening with Key
Note:
The Key is used to open the safe.
DO NOT STORE KEYS IN SAFE!
1. Gently remove the Manual Lock Cover.
2. Insert Key into the lock and turn clockwise. Then:
a. turn the Knob clockwise,
b. turn the Handle clockwise, and
c. pull the Door open.
Manual
Lock Cover
Keys
Handle
Knob
Figure C: Manual Lock
