background image

3/13

BC282

User’s Manual for Biometric Safe

GETTING STARTED

1. Remove Emergency Keys from accessory package

2. To expose the Emergency Key access, remove Logo Plate

(G) screws with provided tool

3. Insert Emergency Key into key access, push and turn

counter-clockwise

4. Turn Handle (H) clockwise to open the safe

5. Continue with INSTALL BATTERIES

INSTALL BATTERIES

1. Remove Battery Compartment (B) cover

2. Insert 4 AA batteries and restore battery cover

3. Continue with FINGERPRITN REGISTRATION

FINGERPRINT REGISTRATION

IMPORTANT: The safe is in either Pre-registered mode or 

Factory Default mode, test safe to determine factory settings 

below

Pre-registered mode: Safe can NOT be opened with any 

fingerprint(s) 

Factory Default mode: Safe can be opened with ANY 

fingerprint(s)

1. With the safe door open, press and release Initialization

Button (A)

2. Immediately place a finger on the Fingerprint Scanner (D)

- Hold finger still

- 1 beep will be heard recognizing the fingerprint; followed by

      2 consecutive beeps

- Remove finger

- Registration is complete

Successful Registration

Registration is successful when a total of 3 beeps are heard

Unsuccessful Registration

2 short beeps will be heard; repeat registration process again

3. To register another fingerprint - repeat steps 1 – 2

4. Continue with TEST (NON) REGISTERED FINGERPRINTS

TEST (NON) REGISTERED FINGERPRINTS

1. Test multiple Non-Registered fingerprints

- Close safe door, turn Handle (H) counter-clockwise to

lock the safe

- Press and release Wake-Up Button (F)

- Place a non-registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should not open

- If the door opens with a non-registered fingerprint,

registration was unsuccessful; the safe is still in Factory

Default mode

- Repeat steps under FINGERPRINT REGISTRATION, and

test multiple non-registered fingerprints

2. Test a Registered fingerprint

- With door closed, press and release Wake-Up Button (F)

- Place a registered finger on the Fingerprint Scanner (D)

- Turn Handle (H) clockwise, the door should open

- Registration was successful, if it only opened with registered

fingerprint(s)

CLOSE/OPEN

 SAFE DOOR

CLOSE: Close safe door, turn Handle (H) counter-clockwise to 

lock the safe

OPEN: Press and release Wake-Up Button (F)

- Place a registered finger on Fingerprint Scanner (D)

- Turn Handle (H) clockwise to open the safe

WARNING

- New Safe is in either Pre-registered mode or Factory

Default mode; ANY fingerprint can open the safe. Only

a successfully registered Fingerprint(s) can terminate

Factory Default mode.

- Register at least two different fingerprints and test a

few times before closing the safe door.

- Test with a non-registered fingerprint. If the safe

opens, the safe is still in Factory Default mode.

- Avoid leaving safe door open and unattended; it will

allow unauthorized individuals to add their fingerprints

and/or reprogram the safe, gaining full access to the

safe and the contents.

- Test the Emergency Keys and store them in a secure

place, NOT inside of the safe.

- To maximize the security and performance of the

safe, test registered fingerprints every 6 months.

- Initialization button cover must be restored after

every use.

- If user resets the safe to Factory Default mode: ANY

fingerprint can open the safe.

- Test and make sure the safe works properly

before mounting.

- Mount the safe before use because the safe has a

small base with a heavy door, and will tip forward if not

properly mounted.

- Keep children away from safe; they should not play

with or around the safe at anytime. Children at play

could accidentally get locked inside the safe or

accidentally pull on the safe door causing safe to tip

over if not properly mounted.

- Failure to follow these warnings could result in serious

injury or death.

Read all instructions before using this safe.

* Actual model may vary

A. Initialization Button
B. Battery Compartment
C. Bolts
D. Fingerprint Scanner
E. Indicator Lights
F. Wake-Up Button

G. Logo Plate and Emergency

Key Access

H. Handle
I. External Battery Pack

(batteries not included) 

J. External Battery Access

A

B

C

F

D

E

G

H

H

H

J

I

Loc

k

Un

l

oc

k

Отзывы: