manualshive.com logo in svg

Bulls Lacuba Evo 25, Перевод оригинальной инструкции по эксплуатации, Страница: 55 / 176

Поделиться
Скачать
Bulls Lacuba Evo 25 Скачать руководство пользователя страница 55

034-03212_1.0_03.12.2018

53

Transportation, storage and assembly

5.2.1

Break in operation

 

If the bicycle is to be removed from service for longer 
than four weeks, e.g. in winter, a break in operation 
has to be prepared.

5.2.1.1

Preparing a break in operation 

Enable display storage mode.

Remove the battery from the bicycle.

Charge the battery to around 60% (three to four LEDs 
of the charge status indicator light up).

The bicycle has to be cleaned with a damp cloth and 
preserved with wax spray. Never wax the friction 
surfaces of the brake.

Before longer periods without use, it is 
recommendable to have your specialist dealer carry 
out servicing and basic cleaning and apply 
preservative agent.

5.2.1.2

Taking out of operation 

Store the bicycle, battery and charger in a dry, 
clean environment.

Check the charge status of the battery after 8 weeks. 
If only one LED on the charge status indicator lights 
up, recharge the battery to around 60%.

The battery discharges when not in use. This can 
cause irreparable damage to the battery.

The battery must be recharged every 8 weeks.

The battery may become damaged if it is connected 
permanently to the charger.

Never connect the battery to the charger 
permanently.

The display battery discharges when it is not in use. 
This can cause it to be irreparably damaged.

Recharge the display battery for at least 1 hour 
every 3 months.

NOTICE

NOTICE

NOTICE

EN_034-03212_1.0_BULLS Brose Center MY19_Inhalt.book  Page 53  Monday, December 3, 2018  9:37 AM

Содержание Lacuba Evo 25

















































































































































































Отзывы:

Нет отзывов