manualshive.com logo in svg

Bulls Lacuba Evo 25, Перевод оригинальной инструкции по эксплуатации, Страница: 100 / 176

Поделиться
Скачать
Bulls Lacuba Evo 25 Скачать руководство пользователя страница 100

Operation

034-03212_1.0_03.12.2018

98

7.5.3

Charging the battery 

 

Fire caused by overheated charger

The charger heats up when charging the battery. In 
case of insufficient cooling, this can result in fire or 
burns to the hands.

Never use the charger on a highly flammable 
surface (e.g. paper, carpet etc.).

Never cover the charger during the charging 
process.

Electric shock caused by penetration by water

If water penetrates into the charger, there is a risk of 
electric shock. 

Never charge the battery outdoors.

Electric shock in case of damage

Damaged chargers, cables and plug connectors 
increase the risk of electric shock.

Check the charger, cable and plug connector before 
each use. Never use a damaged charger.

Risk of fire and explosion caused by damaged 
battery

The safety electronics on a damaged or faulty battery 
may fail. The residual voltage can cause a short circuit. 
The battery may self-ignite and explode. 

If the battery becomes deformed or begins to 
smoke, keep at a safe distance, disconnect the 
power supply at the socket, and notify the fire 
service immediately. 

Never extinguish a damaged battery with water or 
allow it to come into contact with water.

If an error occurs during the charging process, a system 
message is displayed. Remove the charger and battery 
from operation immediately and follow the instructions.

CAUTION

!

CAUTION

!

CAUTION

!

CAUTION

!

NOTICE

EN_034-03212_1.0_BULLS Brose Center MY19_Inhalt.book  Page 98  Monday, December 3, 2018  9:37 AM

Содержание Lacuba Evo 25

















































































































































































Отзывы:

Нет отзывов