Bulls BROSE FIT, Руководство по эксплуатации

Страница: 153 / 290

MY22XXX - XX_1.0_14.06.2022
152
Operation
6.16.3 Charging the battery

The ambient temperature during the charging
process must be within the range from
0 °C to 40 °C.

The battery can remain on the pedelec or can be
removed for charging.

Interrupting the charging process does not
damage the battery.
1 Remove the cable connection cover if
necessary.
2 Connect the mains plug of the charger to a
normal domestic, grounded socket.
3 Connect the charging cable to the battery's
charging port.
 The charging process starts automatically.
 The battery level indicator shows the battery
level during charging.
 When the electric drive system is switched on,
the
display screen shows the charging process.
4 The charging process is complete when the
LEDs on the
battery level indicator turn green.
5 Disconnect the battery from the charger.
6 Disconnect the charger from the mains.
Connection data 230 V, 50 Hz
Notice
 Check that mains voltage! The power source
voltage must match the voltage indicated on
the charger nameplate. Chargers labelled
230 V may be operated at 220 V.
Selection Description
At rest Green, flashing rapidly (2× a
second)
Charging Red l
Charging complete Green
Fault Red, flashing (1× a second)