27
Step 5:
Attach a standard garden hose. Push the drain spout in halfway to
actuate the drain.
NOTE:
The Spa will drain about 5 gallons (20 liters) per minute. Ensure that
the drainage is in an area safely away from window wells or basement entries.
Step 6:
Once the spa is fully drained, pull the drain spout out all the way,
remove hose, replace the drain cap and push drain in all the way.
To Refill Your Spa:
WARNING:
When refilling the spa, always Super Sanitize the new water
by adhering to the instructions in the Water Chemistry section.
Step 1:
To avoid air pockets in the pump(s), refill the spa with water by plac-
ing the hose into the filter compartment through the Weir door. Fill to the
water level indication on the faceplate of the filter assembly.
Step 2:
Restore electrical power supply.
Step 3:
Press any button to reset the control system.
Step 4:
Following instructions in Starting the Spa with New Water (page 16).
filter Maintenance
It is recommended that pleated filter cartridge(s) be cleaned every 3-6 weeks or
as needed. Replace the filter cartridge(s) every 1-2 years or when necessary. To
maintain warranty protection, use only genuine Bullfrog Spas Filter Cartridge
replacements. To clean or replace your filter cartridge(s), complete the following:
CAUTION:
Never operate spa with the filter(s) removed.
Step 1:
Place the spa in Standby mode.
Step 2:
Remove FilterCap™.
Step 3:
Remove cartridge(s).
Step 4:
Using a garden hose with a nozzle or other high-pressure device, clean
cartridge(s). Work top to bottom on each pleat.
Содержание I 331 Series
Страница 1: ...Bullfrog Spas Owners Manual...
Страница 49: ...47 Spa YardTM Stereo II Wiring Diagram...
Страница 63: ......
