background image

Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure 

the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for 

delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and 

electrical requirements.
Remember to carefully read the Owner’s Manual that accompanies your spa and to complete the warranty card 

within ten days of delivery. These items, along with other valuable information, are included in the Owner’s Packet 

which can be located in the equipment compartment of your spa. You will also find your serial number in the 

equipment compartment.
Watkins Manufacturing Corporation reserves the right to change features, specifications, and design without 

notification and without incurring any obligation.

DATE PURCHASED:  _________________________________________________________________

DATE INSTALLED:  ___________________________________________________________________

DEALER: ___________________________________________________________________________

ADDRESS: __________________________________________________________________________

TELEPHONE:  _______________________________________________________________________

In most cities and counties, permits will be required for the installation of electrical circuits or the construction of 
exterior surfaces (decks and spa enclosures). In addition, some communities have adopted residential barrier codes 
which may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or 
spa) by children under 5 years of age. Your Caldera

®

 spa is equipped with a locking cover that meets the ASTM 

F1346-91 Standard for Safety Covers, and as a result, is usually exempt from most barrier requirements. As a 
general practice, your local Building Department will inform you of any applicable barrier requirements at the time 
a permit is obtained for the installation of an electrical circuit. Your Caldera dealer can provide information on which 
permits may be required.

Utopia/Paradise Series

Pre-Delivery Instructions

Содержание Utopia Series Cantabria

















Отзывы: