BullFrog I 331 Series, Руководство пользователя

Страница: 51 / 64

49
Temperature not yet known.
Internal problem detected.
Temperature not yet known.
When your spa is first actuated, it will go into Priming
mode.
The Priming mode will last for up to 4 minutes and then the spa will begin to heat and maintain the
water temperature in the Standard mode.
This is normal within the first few minutes of the spa power up.
This is normal within the first few minutes of the spa power up.
Repair required. Contact your authorized dealer or service organization.
Message
Meaning Action Required
The spa is operating in Standard mode.
Temperature display is current after pump has been running for at least 2 minutes. Press temp
followed by light to switch modes.
The spa is operating in Economy mode.
Ecn will appear solid on the display when the temperature is not current. Ecn will alternate with the
temperature when the temperature is current. Press temp followed by light to switch modes.
The spa is operating Standard-in-Economy mode. Operates the same as Standard mode; however it will revert to Economy mode after 1 hour. Press
temp + light to switch directly to Economy mode.
The spa is in Sleep mode. Press temp + light to switch modes.
The spa is in Standby mode.
Press any button to exit mode and return to normal operation.
See p.29 for further instructions
Spa has tripped GFCI breaker
Diagnostic Message
(for all control systems)