Bull NovaScale Blade BL265, Инструкция по установке и эксплуатации

Страница: 70 / 92

54
NovaScale Blade BL265 - Installation and User's Guide
4.1.1 Setup Utility menu
Use the Setup utility main menu to view and configure blade server configuration data and
settings.
The following menu items are on the Setup utility main menu. Depending on the version of
the Unified Extensible Firmware Interface (UEFI), some menu items might differ slightly from
these descriptions.
•
System Information
Select this choice to view information about the server. When you make changes
through other choices in the Setup utility, some of those changes are reflected in the
system information; you cannot change settings directly in the system information. This
choice is on the full Setup utility menu only.
−
System Summary
Select this choice to view configuration information, including the ID, speed, and
cache size of the microprocessors, machine type and model of the server, the
serial number, the system UUID, and the amount of installed memory.
When you make configuration changes through other options in the Setup utility,
the changes are reflected in the system summary; you cannot change settings
directly in the system summary.
− Product Data
Select this choice to view the system-board identifier, the revision level or issue
date of the firmware, the integrated management module and diagnostics code,
and the version and date.
This choice is on the full UEFI Setup Utility menu only.
•
System Settings
Select this choice to view or change the server component settings.
− Processors
Select this choice to view or change the processor settings.
−
Memory
Select this choice to view or change the memory settings.
− Devices and I/O Ports
Select this choice to view or change assignments for devices and input/output
(I/O) ports. You can configure the remote console redirection, enable or disable
integrated Ethernet controllers, and the SAS controller. If you disable a device, it
cannot be configured, and the operating system will not be able to detect it (this is
equivalent to disconnecting the device).
− Power
Select this choice to view or change power capping to control power consumption
and processor performance states.