Bull NovaScale Blade BL265, Инструкция по установке и эксплуатации

Страница: 78 / 92

62
NovaScale Blade BL265 - Installation and User's Guide
•
Use the following steps to disable the LAN over USB interface from the
Management Module Web interface.
(a) Log in to the Management Module interface.
(b) In the navigation pane, click Blade Configuration under the Blade Tasks
heading.
(c) Scroll down to the Service Processor LAN over USB interface are on the
Blade Configuration web page. The section lists all blades in the
chassis which are capable of enabling and disabling the LAN over USB
interface.
(d) Select the check boxes next to the blade or blades that you want to
enable or disable.
(e) Click the Disable button to disable the LAN over USB interface on the
selected blades.
4.9.3 Configuring the LAN over USB interface manually
The IMM using the LAN over USB interface requires operating-system drivers and other
configuration. For more information about LAN over USB configuration on different
operating systems, see the white paper Transitioning to UEFI and IMM on
http://www.bull.com/support .
4.9.3.1 Windows IPMI device driver
The Microsoft IPMI device driver is not installed by default on Microsoft Windows Server
2003 R2 operating systems. To install the Microsoft IPMI device driver, complete the
following steps:
1. From the Windows desktop, click Start
→
Control Panel
→
Add or Remove Programs.
2. Click Add/Remove Windows Components.
3. From the component list, select Management and Monitoring Tools, and then click
Details.
4. Select Hardware Management.
5. Click Next. The installation wizard opens and guides you through the installation.
Note The Windows installation disk might be required.