Manual Builder extreme 1000/1500/2000 pro
Extreme Builder Pro Manual Eng V2
34
Settings:
1.
Back button, return to previous screen
2.
Information button, gives you useful information about the current screen. Can be removed in
configure menu (screen settings page 2).
3.
Next button, go to page indicated to the left of the button (page 2 in this case).
4.
Click the different icons to move to the menu mentioned (move menu in this case).
The different setting menus:
•
Move
– move the nozzle.
•
Preheat
–set the desired temperature for the bed and nozzle here
•
Filament
–extrude and change filament
•
Network
– select a WIFI connection. You can also see your Wifi and Ethernet IP-address here.
•
Material
– select the material you wish to use here.
•
Lock
– locks the printer to make sure it can’t be touched while printing.
•
Tutorial
– help videos
•
Camera
– shows you a view of the webcam image
•
Light
– set brightness and turn lights on/off
•
Configure
– various configurations for your printer
•
Info
– general information about your printer
Note: While printing several menu options are disabled.