Manual Builder extreme 1000/1500/2000 pro
Extreme Builder Pro Manual Eng V2
23
G-code/slicing
To start printing, the printer needs a G-code file. The G-code can be generated by a so called slicer. We
advise to use simplify3D. The possible input file types for slicer software are: STL/OBJ/AMF/DAE files. To
generate the correct G-codes for the Builder extreme printers there are printer-profiles that can be
downloaded from the Buildere3dprinters.com website. Be sure to use the profile that fits your type of
machine, nozzle diameter, materials, etc. When a G-code file has been generated it can be put on an USB-
stick or send to the machine via Wi-Fi using the builder web portal.
Exclusive gcode command for the Builder dual extruder:
•
G93 Rxx: You can adjust the ratio of the 2 extruders in the G-code. Put this code in after the last
tool change, before the printing starts, see example below.
When using 1 color/material, always use both extruders 50/50% to prevent
clogging the nozzle!
Be sure the build plate is cooled to room temperature before removing a finished
object!
We do not recommend to print multiple objects in one print. If failure occurs, all the object will fail and
the time that is won by printing multiple object is minimal.