11
EXPLODED VIEW / PARTS LIST /
BUG-1856 UNI-BUG WELDING GROUP
ITEM
QTY
PART NO.
DESCRIPTION
1
2
BUG-1853
Machined Rack 7-1/2"
2
1
BUG-1881
Cable Anchor w/Swivel Clamp
3
1
BUG-2708
Clamp
4
1
BUG-5451
3.5" Rackholder
5
1
BUG-5462
Right Angle Clamp
6
1
CON-1020
Clamp
7
2
FAS-0957
Fit Hd Soc Scr 1/4-20 x 3/4
8
1
UNI-1036
Rackrider w/Post
2
5
3
4
7
1
1
8
6
14
The UNI-BUG II can be adapted for dual welding applications as shown
below. A double racker mounting angle is bolted directly onto the left side of
the machine using two 1/4-20 socket head cap screws. Two 3.5" rackholders
are then mounted to the angle, each engaged with a 7-1/2" rack positioned
horizontally in opposite directions. At the end of each horizontal rack, a right
angle clamp block is attached allowing for an additional rackholder and
7-1/2" rack to be mounted vertically. At the end of each vertical rack, a swivel
clamp assembly and torch clamp are added. A cable anchor with swivel
clamp is mounted to the front right side of the UNI-BUG II to complete the
set up.
UNI-BUG II FOR DUAL WELDING
A UNI-BUG II converted for dual welding using a UNI-1350 UNI-BUG Dual
Welding Group.
RACK MOUNTING
The handle mounting bracket has been redesigned so that it can be
mounted on either the left or right side of the machine. This allows the
rackholder and rack also to be mounted on either side. The welding gun can
then be positioned behind the drive desired, to reduce heating of the rollers.
UNI-1019 STEEL DRIVE ROLL
Optional hardened steel drive rolls are available for use when running on
a heated workpiece, which could melt the sleeves on the standard drive
rolls.
Order (2) UNI-1019 Steel Drive Rolls.
