WCR-HP-GN User Manual
8
Chapter 1 Product Overview
Diag LED
status
Meaning
Status
2 blinks *
1
Flash ROM error
Cannot read or write to the flash memory.
3 blinks *
1
Ethernet (wired) LAN
error
Ethernet LAN controller is malfunctioning.
4 blinks *
1
Wireless LAN error
Wireless LAN controller is malfunctioning.
5 blinks
IP address setting error
Because the network addresses of both the Internet port (INTERNET
port) and the LAN port are the same, it is not possible to establish
communication. Change the LAN side IP address of this unit.
Continuously
blinking
*2
Updating the firmware
Saving settings
Initializing settings
Updating the firmware.
Saving the settings.
Initializing the settings.
*1
Unplug the AC adapter from the wall socket, wait for a few seconds, and then plug it again. If the
light still flashes, please contact technical support.
*2
Never unplug the AC adapter while the Diag LED is blinking continuously.