Chapter 3 Installation
WCR-HP-GN User Manual
17
4
When the below screen appears, select [AOSS configuration] or [Manual Configuration] from
[Select WDS Setup method].
AirStation will attempt to connect to other wireless APs to set up WDS.
If the target wireless AP that supports WDS is a Buffalo AirStation, select [AOSS
configuration] , then push the AOSS button on the target AP.
If the target AP is not a Buffalo AirStation, select [Manual Configuration]. Click [Scan for
SSID]. A list of available wireless AP will be generated. Select the target AP’s SSID from the
list and click [Next] to continue.
5
Step through the wizard to complete the setup.
After configuring the WDS bridge with AOSS, any preexisting AOSS wireless clients will be
disconnected. Turn to page 75 to reconnect wireless clients with AOSS.