ÐÏ×ÅÒ
ÉÎÔÅÒÎÅÔ
ÌÁÎ
ᴮ
ᴯ
ᴰ
ᴱ
power outlet
AirStation wireless router
(rear side)
PC
1) connect
1) connect
Ethernet cable
2) connect the power supply
ADSS
LAN
1
2
3
4
POW
ER
INTERNE
T
ON
modem
power outlet
computer
WCR-HP-GN User Manual
14
Chapter 3 Installation
4
Connect your computer to one of the AirStation’s LAN ports with the Ethernet cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
5
Confirm the devices are connected correctly as the below diagram shows.
6
Wait for a minute or so, until the AirStation’s LEDs are lit as described below:
Power
Green light is on
Wireless
Green light is on
Router
Green light is on
Diag
Off
LAN
Green light is on or blinking
Internet
Green light is on or blinking
※
Refer to page 7 for LED locations and other details.
7
Launch a web browser. If the [home] setup screen is displayed, setup is complete.
If a user name and password screen are displayed, enter [root] (in lower case) for the user
name, leave the password blank, and click [OK]. Follow the instructions on the screen to
complete setup.
You’ve completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.