
7
The TeraStation’s Ethernet port will automatically adjust to use either a Crossover or Patch cable, so you
may connect the TeraStation to your network with either type of Ethernet cable. Buffalo Technology doesn’t
recommend connecting the TeraStation directly to a PC.
Verify that the
LINK/ACT LED
on the front of TeraStation is lit (see
LINK/ACT LED
LINK/ACT LED
page 6
’s picture). If it’s lit, go to
page 8
to continue setting up TeraStation. If the
LINK/ACT LED
is still not lit, try the suggestions below to verify that
LINK/ACT LED
LINK/ACT LED
you’re not suffering from common setup problems.
Having problems? Make sure that:
●
the TeraStation and the router, hub or switch are both powered on,
●
the Ethernet cable is securely plugged in at both ends, and
●
the Ethernet cable is not damaged. Verify this by trying a different Ethernet cable.
If problems persist, contact our 24/7 technical support at
1(866) 752-6210
.
TeraStation Quick Setup
Having problems?