6
Make sure that the power switch
on the rear of the TeraStation is
in the
ON
position, with the “
ON
ON
I
”
symbol pressed down.
TeraStation Quick Setup
Press the
power button
on the
front panel. The LED’s will swirl as
your TeraStation boots up.
After your TeraStation has completed booting up and the LED’s have ceased to
swirl, check the
LINK/ACT LED
on the front of the TeraStation. If it’s lit, then your
LINK/ACT LED
LINK/ACT LED
TeraStation is connected properly, and you can go on to
page 8
. If it’s not lit, turn
to
page 7
for troubleshooting.
page 7
page 7
