18
1. Power Button –
Press and release the
1. Power Button –
1. Power Button –
Power Button to turn the TeraStation on. Hold it
down for 3 seconds to turn the TeraStation off.
2. USB Ports –
USB ports on both front and
2. USB Ports –
2. USB Ports –
rear panels of the TeraStation may be used
to connect USB hard drives, a printer, or an
additional TeraStation to your TeraStation. See
TeraStation Expansion
on
page 17
for more
page 17
page 17
information on using TeraStation’s USB ports.
TeraStation Diagram
3. Hard Drive Status (also 5, 8, and 10) –
This LED will glow green when the corresponding hard
3. Hard Drive Status (also 5, 8, and 10) –
3. Hard Drive Status (also 5, 8, and 10) –
drive is detected at boot, and will blink green when a disk check or format is in process. It will glow red
when the hard drive is 90% full or more, and blink red if there is a problem with the drive.
4. Hard Drive Access (also 6, 7, and 9) –
This LED will blink green when the associated hard drive
4. Hard Drive Access (also 6, 7, and 9) –
4. Hard Drive Access (also 6, 7, and 9) –
is accessed. During startup, it’s normal for all the lights on the front panel to light up in order, producing a
pinwheel effect.
