Buffalo Tools MT43CC, Инструкция по эксплуатации

Страница: 13 / 19

13
TRANSPORTING YOUR EARTH CULTIVATOR
1. After using the cultivator and before transporting it in
a truck bed, screw the gas cap screw and gas cap on
(clockwise) tightly. The gas cap will not leak during
transporting if gas cap is tight and the screw at the top
is tight. Never transport engine inside an enclosed space
within a vehicle. Fuel or fuel vapors may ignite causing
serious injury or death.
2. If fuel is present in the fuel tank, transport in an open
vehicle in an upright position.
3. If an enclosed vehicle must be used, remove gas into
an approved red fuel container.
DO NOT siphon by
mouth.
4. Run engine to use up the fuel in the carburetor and fuel
tank. Always run engine in a well-ventilated area.
5. Wipe away any spilled fuel from engine and cultivator.
Allow to dry.
6. Gas cap and gas cap vent screw should be turned
down tightly before transporting cultivator in a vehicle.
LONG TERM STORAGE
If your cultivator will not be used for more than one month,
prepare it for long term storage.
Steps for long Term Storage
1. Remove the remainder of the fuel from the gas tank into
an approved fuel container.
2. Store cultivator engine in a vertical position.
3. Remove all debris from cultivator tines and engine.
SERVICE INFORMATION
This Cultivator is built with quality for long- lasting
durability, but no amount of careful design by us, and
careful maintenance by you, can guarantee a repair-free
life for your machine. Most repairs will be minor, and easily
fixed by following the suggestions in the troubleshooting
guide in this section.
The guide will help you pinpoint the causes of common
problems and identify remedies.
For more complicated repairs, contact your place of pur-
chase or, Inc. for an authorized service center in your area.
CAUTION
BY MOUTH.
TEMPTING ANY MAINTENANCE OR REPAIR.