Buffalo Tools MT43CC, Инструкция по эксплуатации

Страница: 8 / 19

BM6A
GAP .028
TRANSMISSION
32:1
maximum
SPEED
x diameter
8
SPECIFICATIONS
Two adjustable wheel height settings for cultivating, plus Low Height setting for easy transport
OPERATING YOUR CULTIVATOR
PREPARING ENGINE FOR STARTING
GAS AND OIL
Use a quality 2-cycle oil and use unleaded regular gas
only. Run engine with a 50:1 ratio (gas/oil).
Mixing Fuel
1. Fuel must be mixed in a container outside in a well
ventilated area.
2. Fill certified fuel container 1/4 full of recommended fuel.
3. Add recommended amount of 2 cycle oil.
4. Screw container cap on straight and tight.
5. Shake the container to mix fuel and oil.
6. Unscrew gas cap slowly to vent, add the remainder of
fuel requirements.
7. Wipe away any spilled fuel or oil and allow to evaporate
before moving or transporting.
Filling Fuel Tank
1. Shut off engine and allow engine to completely cool
before refilling the fuel tank.
2. Move to a well-ventilated area, outdoors, away from
flames and sparks.
3. Clean debris from area around the fuel cap.
4. Loosen fuel cap slowly. Place the cap on a clean, dry
surface.
5. Carefully add fuel without spilling.
6. Do not fill gas tank completely full, allow space for fuel
to expand.
7. Immediately replace fuel cap and tighten. Wipe off
spilled fuel and allow to dry before starting engine.
ENGINE DISPLACEMENT 43cc
FUEL TANK CAPACITY 27 ounces
GAS/OIL RATIO 50:1
OIL TYPE
2 CYCLE ENGINE OIL
FUEL TYPE
Minimum 87 octane gasoline
with NO ethanol content
CAUTION
NEVER STORE ENGINE WITH FUEL IN THE TANK INDOORS.
NEVER MIX FUEL AND OIL DIRECTLY IN ENGINE
FUEL TANK. USE ONLY NON METAL, PORTABLE
FUEL
CONTAINERS APPROVED BY THE
UNDERWRITER’S LABORATORY (U.L.) OR THE
AMERICAN SOCIETY FOR TESTING & MATERIALS
(ASTM).
IMPORTANT
DO NOT START ENGINE WITH BATTERY
CHARGER CONNECTED TO BATTERY. THIS COULD
CAUSE DAMAGE TO THE CULTIVATOR.