10
necessary.
Exhaust System
Check for leakage. Retighten
or replace gasket if necessary
l
Check muffler screen.
Clean / replace if necessary.
l
Carburetor
Check choke operation
l
Cooling system
Check fan damage.
l
Starting system
Check recoil starter operation.
l
Idle speed
Check and adjust engine idle speed
l
Fittings / Fasteners
Check all fittings and fasteners
correct if necessary.
l
Crankcase breather
Check breather hose for cracks
or damage. Replace if
necessary
l
Generator
Check the pilot light comes on
l
ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up the engine for several minutes.
Then stop the engine and turn the fuel cock knob to “
OFF
”.
Turn the fuel tank cap air vent knob clockwise.
2. Loosen the screws and remove the cover.
3. Remove the oil filler cap
4. Place an oil pan under the engine.
Tilt the generator to drain the oil completely
5. Place the generator on a level surface.
6. Add engine oil to the Lower Level line.
7. Install the oil filler cap
8. Install the cover and tighten the screw
l
Engine Oil SAE 10W30 Capacity: 7.5 oz.
l
Be sure no foreign material enters the crankcase.
l
Do not tilt the generator when adding engine oil. This could
result in overfilling and damage to the engine
l
Clean the oil filter every other 100 hr.
