Buffalo Tools Black Bull DP16UL, Инструкции по сборке и эксплуатации

Страница: 6 / 18

DP16UL 16 Speed Drill Press Assembly & Operating Instructions
6
When servicing a tool, use only identical replacement parts and follow instructions in the manual. Use of
unauthorized parts or failure to follow maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product.
Before use, read carefully and understand all warnings, cautions, instructions and labels. Failure to do so could result
in serious personal injury, property damage or even death.
IMPORTANT SAFETY INSTRUCTIONS
Before using this tool, you need to become familiar with its operation. If you are unsure about the
operation of the tool, or have any questions about its proper use, call the Customer Service Department at
1-888-287-6981. Follow these instructions for safe handling of the tool:
•
Always secure and support the work piece using clamps. Do not use your hands to hold the
piece in place.
•
Be sure your work area is clean and secure before turning the power switch into the “ON”
position.
Be sure the area is free from all foreign material, nails, staples, or any other material .
•
Turn the drill “OFF” and unplug from the power source before making any changes or
adjustments to the drill.
•
Do not use solvents containing carbon tetrachloride, ammonia or acetone to clean the drill.
Never use gasoline, paint thinner, or other caustic chemicals that can damage the plastic parts of the
tool.
•
Always use the appropriate safety gear when operating this drill. Including but not limited, to
goggles, dust mask or respirator. Always work in a well-ventilated area to reduce your exposure to
harmful chemicals and dust particles.
•
Keep hands away from the cutting area.
•
Do not reach under the work piece.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
SYMBOLS
The following symbols may be used on your tool. Be familiar with and learn the symbols to operate the tool safely.
Symbol Name Description
V Volts Voltage (Potential)
A Amperes Current
Hz Hertz Frequency (Cycles per Second)
W Watt Power
Kg Kilograms Weight
Alternating Current Type of Current
Direct Current Type of Current
Alternating or Direct Current Type of Current
Earthing Terminal Grounding Terminal
Class II Construction Denotes Double Insulation
min Minutes Time
s Seconds Time
Diameter Size of Drill Bits, Grinding Wheels, etc.
No Load Speed No-load Rotational Speed
… /min Revolutions per Minute Revolutions, Surface Speed, Strokes, etc. per Minute
1,2,3 … Ring Selector Settings Speed, Torque or Position Settings