Buffalo Tools Black Bull DP16UL, Инструкции по сборке и эксплуатации

Страница: 5 / 18

DP16UL 16 Speed Drill Press Assembly & Operating Instructions
5
All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and cluttered
areas.
Keep children, and other distractions at a distance while operating power tools.
Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to
pull the plug from the outlet. Keep the cord away from materials and surfaces that could damage cords. The risk
of electric shock increases when the power cord is damaged.
Always use the appropriate extension cord, making sure it is rated for use with drills. Always be sure the
extension cords are in good condition, free of cuts or nicks in the insulation. If using the drill in an outside area
with an extension cord, make sure the cord is rated for outdoor use.
Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes,
radiators or major appliances increases your risk of electric shock.
Use common sense while operating this drill.
Do not use this drill if you are:
•
Feeling tired or are under the influence of alcohol or drugs.
•
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
•
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this drill always:
•
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
•
Be sure all adjusting keys or wrenches have been removed before starting the drill.
•
Be sure the power switch is in the “OFF” position before plugging the drill into an electrical outlet.
Follow these steps to maintain safe working conditions and good working condition of power tools.
Improper care can result in electric shock or serious injury.
•
Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
•
Use the correct tool for the job. Using the correct tool is safer and faster.
•
Make sure the power switch is in good working order. If the power switch no longer turns the tool
“ON” or “OFF”, discontinue use, and have the tool replaced or repaired.
•
Remove the power cord from the power source before storage, changing accessories, or moving
the tool.
•
Keep out of reach of children , or any untrained person. Store tools in a safe and dry place.
•
Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of
the power tool, and reduce the risk of injury.
•
Check to be sure all moving parts are free from binding and are properly aligned.
•
Use only accessories that are recommended by the manufacturer for your tool model.
Safety glasses and ear protection must be worn during operation.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified
personnel could result in a risk of injury.