Https://www.bueno-electric.com
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
BUENO ELECTRIC
Contact: [email protected] Fax: +86-25-51816989
1. Overview
1.1 Introduction
The No-Cascading new CAN Fiber Optic Converter is a multi-master and high performance
Field bus Control System (FCS). The modular fiber optic transmission system can be used
to transmit CAN-based bus systems such as DeviceNet or CANOpen via fiber optics data
interfaces over a pair of multi mode or single mode optical fibers. Our FMC Fiber Optic
Converter uses the fiber cable as its transmission medium and utilizes Optical Fiber
modulation/demodulation technology to changes the electric medium into a light medium
transmission.
The Fiber Optic Converter product eliminates many of the disadvantages of copper cable.
Examples of these disadvantages are EMI/RFI, ground loops (electrical isolation with fiber),
high attenuation (high signal loss), short transmission distance between nodes of a system,
and potential lightning damage.
The Fiber Optic Converter can be widely used, such as Industrial Controls, Intelligent
Transportation Systems (ITS), Industrial Networking, Supervisory Control and Data (SCADA)
and so on.
1.2 Technical Specification
CAN BUS
Connectors
Block Terminal
Standard
CAN1.0, CAN2.0
Data Rate
DC0-1Mbps
Extended Distance
SM:0~20Km MM:0~2Km
OPTICAL
Number of Fibers
4
Wavelength
1310/1550nm(SM), 850/1310nm(MM)
Fiber Type
62.5/125μm(MM), 9/125μm(SM)
Distance
0 ~ 2Km(MM) , 0~20 Km(SM)
Connector Type
ST/PC or SC/FC as options
GENERAL
Operating Temperature
-30~ 70˚C / -30 ~ +158ºF
Operating Humidity
0 ~ 95% non-condensing
Mean Time Between Failure (MTBF)
> 70,000hrs
Power Supply Adaptor
DC 9~40V
Dimensions (H ×L×W)
112(H)×147(W)×36(D)MM
