Buderus Logano GE434 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 72

Buderus Logano GE434 Скачать руководство пользователя страница 2

Overview

2

We reserve the right to make any changes due to technical modifications.

Commissioning and maintenance instructions Logano GE434 Gas-fired special boiler • Issue 02/2003

Buderus Heiztechnik GmbH • http://www.heiztechnik.buderus.de

Subject to technical modifications.

Constant development may lead to minor deviations in
the illustrations, functional steps and specifications from
those described/shown.

Updating your documentation

Please let us know if you have any suggestions which
would improve our documentation or if you have noticed
any errors.

About these instructions

This manual lists the gas types applicable to each
country, which only apply to those countries.

These installation and maintenance instructions contain
important information for the safe and appropriate initial
start-up and maintenance of the Logano GE434 gas-
fired special boiler.

These installation and maintenance instructions are
designed for specialists, who, due to their vocational
training and experience, are knowledgeable in handling
heating systems and gas installations.

This document also refers to accessories which may be
used in conjunction with the boiler installation. Observe
the appropriate installation instructions when installing
such accessories.

For information about the standard delivery, handling,
installation and electrical connection see the boiler
installation instructions.

This product meets all fundamental
requirements of applicable European
Directives:

Its conformity has been verified. All
associated documents and the original
Declaration of Conformity are available from
the manufacturer.

PLEASE NOTE

Observe all standards and guidelines
applicable to the operation of this system
in your country.

«
1
2
3
4
...
»

Содержание Logano GE434









































































Отзывы:

Нет отзывов