Buchi E-800 Скачать руководство пользователя страница 31

Страница: 31 / 88

Büchi Labortechnik AG

Installation | 5

Operation Manual UniversalExtractor E-800

31/88

NOTICE

Risk of property damage and diminished performance due to use of unsuitable
power cables.

The power supply cables supplied with the product by BUCHI precisely match the
requirements of the device. If other power cables that do not meet those
requirements are used, the device may be damaged and/or its performance
diminished.

Use only the power supply cables supplied with the product or ordered
separately from BUCHI.

If using any other power supply cables, make sure that they match the
specifications on the type plate.

Make sure that all connected devices are grounded.

Make sure that the power plug is freely accessible at all times.

Insert the power cable into the connection labeled Power IN on the back of the
instrument.

Insert the power plug into the power socket.

5.4

Securing against earthquakes

The instrument has an earthquake fixing point to protect the device against falling.

Fig. 10: Securing against earthquakes

Lashing mount

Tie the lashing mount to a fixed point using strong cord or a wire.

5.5

Connecting the coolant hose

There are two possibilities for coolant supply:

Cooling water valve

BUCHI Recirculating Chiller

See Chapter 11.3 "Spare parts and accessories", page 81

Содержание E-800

























































































Результаты поиска

Содержание E-800

Отзывы:

Похожие инструкции для E-800

Бренды по названию

Популярные бренды

Buchi E-800, Руководство по эксплуатации

Результаты поиска

Содержание E-800

Отзывы:

Похожие инструкции для E-800

Бренды по названию

Популярные бренды