ACCESSORIES | PAGE 39 OF 62
If the device is left unplugged from the mains for a longer time (even in the OFF status), the accumulators
gradually spontaneously discharge. This effect is characteristic of the accumulators and cannot be removed;
therefore, if the device has been off and unplugged for a longer time than approximately 2-3 months, we
recommend recharging it, preferably for 48 hours without interruption.
For the same reason, we recommend charging the device continuously for at least 48 hours immediately after
purchase, regardless of the accumulator status indication (you can work with the device normally, only do not
unplug it from the adapter, the accumulator recharges even during standard operation of the device). Thus the
accumulator becomes “formatted” and will keep working longer without recharging.
5.3 LITHIUM
BATTERY
The device contains a lithium battery for backing up the date and time. The type of battery is stated in the chapter
Technical Parameters
. Replacement is provided by the authorized service of BTL devices.
5.4 ACCESSORIES
COMMON FOR ALL UNITS
•
External power supply Adapter 60W / Adapter 90W including the mains cable
•
User’s
manual
•
Markers for output cables
•
Trolley
5.5 ACCESSORIES FOR ELECTROTHERAPY
•
user’s guide for electrotherapy
•
patient cable BTL-236-1
•
patient cable BTL-236-2 (optional)
•
flat rubber electrodes 7 x 5 cm
2
•
flat rubber electrodes 12 x 8 cm
2
•
sponge covers 7 x 5 cm
2
•
sponge covers 12 x 8 cm
2
•
set of fixation belts
•
point electrode (optional)
- ball point attachment – diameter 2 mm
- ball point attachment – diameter 6 mm
- HVT attachment
•
self-adhesive electrodes (optional)
•
vaginal electrode (optional)
•
rectal electrode (optional)
•
interface cable between BTL-4000 and BTL vac (optional)
