MAINTENANCE AND SAFETY INSTRUCTIONS | PAGE 27 OF 38
4.1.1
SHOCK TRANSMITTER REPLACEMENT PROCEDURE
The shock transmitter can be replaced as necessary. Three shock transmitters are included as part of the BTL-6000 SWT
Topline standard accessories:
•
1x replaceable multi-focus shock transmitter (Ø 15mm)
•
1x replaceable multi-focus shock transmitter (Ø 9mm)
•
1x replaceable focusing shock transmitter (Ø 15mm)
Replacement procedure:
1.
Unscrew the screw cap of the shock transmitter by hand
2.
Remove the shock transmitter and both O-rings from the applicator
3.
Insert the selected shock transmitter “as is" to the applicator, including the mounted O – rings
4.
Put the shock transmitter screw cap back in place and screw it on tightly by hand.
O-rings
