This mode of operation can associate a function from those described below with each pair of keys, pair 1-3 and pair 2-4, of radio
control L4572SB.
a) Automation
- Actuator ON/OFF; operation in O/I mode. With quick press actuator ON/OFF, with long press dimmer adjustment (only for
point point command). The ON command and intensity adjustment UP are automatically associated with the upper key of the
pair while the OFF command and intensity adjustment DOWN are associated with the lower key.
- Timed ON. Both keys of the pair perform the same function.
- Flash. Both keys of the pair perform the same function.
- Rolling shutters UP and DOWN; up-down operation to limit switch in bistable mode. The UP command (UP for long press,
STOP for short press) is automatically associated with the upper key of the pair while the DOWN command (DOWN for long
press, STOP for short press) is associated with the lower key.
- Lock/unlock actuator. Both keys of the pair perform the same function.
- Call scenario. Both keys of the pair perform the same function.
b) Video door entry
- Control door lock (also with call in progress). Both keys of the pair perform the same function.
- Control staircase lights. Both keys of the pair perform the same function.
- Floor call (all calls). Both keys of the pair execute the same function.
- Auto-Switching On and cycle mode of cameras (only with SCS modulator item F442). Both keys of the pair execute the same function.
c) Sound system
- Amplifier ON/OFF; the ON always works in Follow me mode. With quick press amplifier ON/OFF, with long press volume
adjustment. The amplifier ON and volume UP commands are automatically associated with the upper key of the pair while the
amplifier OFF and volume DOWN commands are associated with the lower key.
- Cycle source/Change station-tune. The Cycle source command is automatically associated with the upper key of the pair while
the Radio station or track change command is associated with the lower key.
d) Auxiliary channels
- Auxiliary lights ON/OFF; operation in O/I mode. The ON command is automatically associated with the upper key of the pair
while the OFF command is associated with the lower key.
- Rolling shutters UP and DOWN; up-down operation to limit switch in bistable mode. The UP command (UP for long press,
STOP for short press) is automatically associated with the upper key of the pair while the DOWN command (DOWN for long
press, STOP for short press) is associated with the lower key.
- Reset. Both keys of the pair perform the same function.
Up to 24 functions can be associated with each receiving interface (i.e. up to 12 radio controls L4572SB can be associated with
each interface). The function required and the key pair are associated by means of the procedure described below.
SELF-LEARNING MODE - Configurator SPE=0
CONFIGURATION
15
To associate a function with each of the radio control pairs of keys,
proceed as follows:
1) Press the pin pushbutton on the interface for at least 3 seconds; the red LED shines steadily. Release the key.
2) Within 20 seconds press one key of the pair on the radio control which you want to program; the red LED starts to flash indicating
that the programming mode is activated.
3) Within 5 minutes set the function to be associated with the pair of keys of the remote control by means of the corresponding device
(ex. command, amplifier, touch screen, etc.); the red LED flashes quickly for about 2 seconds to indicate that the programming
has taken place.
4) Points 1, 2 and 3 can be repeated for all the pairs of keys, even for a pair for which the association has already been made (if
you want to change it).
To cancel the programming of a pair of keys
proceed as follows:
1) Press the pin pushbutton for at least 8 seconds; after 3 seconds the red LED shines steadily, after another 5 seconds it goes
out. Release the key. The red LED shines steadily.
2) Within 20 seconds press on the control one key of the pair whose programming is to be cancelled; the red LED flashes quickly
for about 2 seconds to indicate that the cancelling has taken place.
3) From this moment the pair of keys will not activate any commands until it has been reprogrammed.
To cancel all the interface associations at the same time
, press the pin pushbutton on the interface for about 12 seconds; after
3 seconds the red LED shines steadily, after another 5 seconds it goes out and after another 4 seconds it flashes quickly for about
2 seconds, confirming that all the programming have been cancelled.
Release the key.
A
0-9
PL1
1-9
M1
0
PL2
0
M2
0
SPE
0
M1
PL2
M2
PL1
A
SPE
1
2
3
4
Pair of keys 1-3
Pair of keys 2-4
PROGRAMMING
