To cancel a code from interface L/N/NT4575SB,
proceed as follows:
1) Press the pin pushbutton on the interface for at least 8 seconds (after 3 seconds the red LED shines steadily, after another 5
seconds it goes out). Release the key. The red LED lights up again.
2) Within 20 seconds press a key of the pair whose programming you want to cancel; the red LED flashes quickly for about 2
seconds to indicate that the cancelling has taken place.
3) From this moment the pair of keys will not send any command until it has been reprogrammed.
To cancel all the codes from interface L/N/NT4575SB
, press the pin pushbutton for about 12 seconds (after 3 seconds the red LED
shines steadily, after another 5 seconds it goes out and after another 4 seconds it flashes quickly for about 2 seconds, confirming
that all the programmings have been cancelled). Release the key.
GENERAL WARNINGS ON RADIO INTERFACE L/N/NT4575SB
1) If the configuration in the interface is wrong (or there are no configurators) the interface LED starts to flash without stopping,
until the configuration is correct.
2) If, while trying to program/cancel a radio command in the L/N/NT4575SB interface, the red LED goes out without giving a
confirmation, there are three possibilities:
–
during the cancelling
, the code is not in the memory and thus cannot be cancelled;
–
during the programming
, the memory is full and thus will not accept any more codes;
–
during the scenario programming/cancelling
, the scenario module is blocked.
20
CE DECLARATION OF CONFORMITY
Item
L4572SB
conforms to the essential requirements of directive 1999/5/CE, because it respects the following standards:
ETSI EN 300 220-3 ETSI EN301 489-3
Year of approval of the CE marking according to the directive indicated: 2005
21
CE DECLARATION OF CONFORMITY
Items
L/N/NT4575SB
conform to the essential requirements of directive 1999/5/CE, because they respect the following standards:
ETSI EN 300 220-3 ETSI EN301 489-3 EN60950 EN50090-2-2 EN50090-2-3 EN50428
Year of approval of the CE marking according to the directive indicated: 2005
22
TECHNICAL DATA L4572SB
Power supply: Piezoelectric generator
Transmission frequency: 868 MHz
Type of modulation: ASK
Range: 70 m in free space (metal and cement walls or metal plates reduce the range)
Size: 2 Living International, Light, Light Tech modules
Operating temperature: 0°C - +40°C
TECHNICAL DATA L/N/NT4575SB
Maximum absorption: 33 mA
Power supply: 18 - 27 Vdc
Frequency: 868 MHz
Size: 2 Living International, Light, Light Tech modules
Operating temperature: 0°C - +40°C