BT Response 75+, Руководство пользователя

Страница: 7 / 23

8950 Response 75+ UG [2] – 29/09/2008 8950 Response 75+ UG [2] – 29/09/2008
7
Getting started
IMPORTANT
Only use the cables provided with the product.
Location
You will need to place your BT Response 75+ near to your telephone and close
enough to a mains power and telephone socket so that the cables will reach.
Setting up
1. Plug the power adaptor cable into the back of the BT Response 75+.
To prevent the cable being pulled out accidentally, place the cable behind
the clip on the back of the unit.
2. Plug the power adaptor into the mains power wall socket and switch on.
The Messages display will flash for about 38 seconds and then show
0
(no
messages). The display will then flash slowly until any button is pressed.
3. Unplug your phone from the telephone wall socket. Then plug the telephone
cable attached to your BT Response 75+ into the telephone wall socket.
4. Plug the telephone line cord from your telephone into the back of the
BT Response 75+. You can now use your telephone as normal.
1
Mains power
adaptor
4
Telephone line cord
from your phone
3
To telephone wall socket
Check your telephone wall socket
If you do not have a modern phone socket,
call Freephone 0800 800 150 and ask for a
BT engineer to come and fit the correct socket.
This is a chargeable service.