BT Response 75+, Руководство пользователя

Страница: 8 / 23

Getting started 8
8950 Response 75+ UG [2] – 29/09/2008 8950 Response 75+ UG [2] – 29/09/2008
To quickly check the time:
Press and release the button, the day and
time is announced in hours and minutes.
Wall mounting (optional)
Your BT Response 75+ can be wall mounted using the wall plugs and screws provided.
1. Drill two holes in the wall 72mm
apart in the position you want to
mount your BT Resonse 75+.
2. Insert the wall plugs so they’re flush
with the wall and drive in the screws,
leaving a small gap between the
screw heads and the wall. Place your
BT Response 75+ over the screw
heads and gently slide it down.
Set the time and day
Your Response 75+ will store the time and day an incoming message or memo was
received so you will need to set the correct day and time.
1. Press and hold the button. The current day setting will be announced.
2. Whilst holding down the button, use the and buttons
to select the correct day. When the day setting you want is announced, release
the
button.
3. Press and hold the button. The current hour setting is announced.
4. Whilst holding down the button, use the and buttons to
select the correct hour using the 12 hour clock. (To move more rapidly through
the hour settings you can press and hold the
and buttons).
When the hour setting you want is announced, release the button.
5. Repeat steps 3– 4 to set the correct minutes.
6. Your Response 75+ will now announce the full day and time.
Your BT Response 75+ is ready to start receiving messages.
WALL
WALL PLUG SCREW
72 mm
AM and PM
The time on your BT Response 75+ is announced
using the 12-hour clock. Be sure to hold down
the or buttons long enough for your
machine to say whether it is am or pm.
IMPORTANT
Before you wall mount, please check that:
• you are not drilling into any hidden wiring
or plumbing
• the mains power adaptor will reach the
plug socket
BT are not responsible for any damage/injury
caused while attempting to wall mount your
phone.