BT Response 75+, Руководство пользователя

Страница: 18 / 23

Remote access 18
8950 Response 75+ UG [2] – 29/09/2008 8950 Response 75+ UG [2] – 29/09/2008
To switch your answering machine on/off
When you hear ‘End of messages’ or ‘You have no messages’, within 8 seconds,
press
/
. Your BT Response 75+ answering machine will switch off and announce
‘Answer off’.
Press
/
again within 8 seconds, to switch it back on again. Your BT Response
75+ will announce ‘Answer On’.
To switch between Answer Record and Answer Only mode
When you hear ‘End of messages’, within 8 seconds, press
*
. Your BT Response
75+ will announce ‘Answer Only on’ or ‘Answer Only off’.
Press
*
again to change the setting.
To change your outgoing message
When you hear ‘End of messages’ or ‘You have no messages’, within 8 seconds, press
.
twice. Your BT Response 75+ will beep to let you know it is starting to record.
When you have finished recording your new outgoing message, press and hold
'
button for one second. Your BT Response 75+ will beep and play back your message.
To reinstate the default outgoing message, press
,
during playback of your message.
To check your outgoing message
When you hear ‘End of messages’ or ‘You have no messages’, within 8 seconds,
press
0
. Your BT Response 75+ will play back your outgoing message.
To turn your BT Response 75+ on
This is useful if you forgot to turn on your answering machine before going out.
1. Call your BT Response 75+ and let it ring. It will answer the call after 20 rings.
When you hang-up, the answering machine will be switched on and will
answer calls.
Memory full
If the memory is full, you will have to delete
some messages before your BT Response 75+
will switch to ‘answer on’ mode. After you hear
the ‘memory full’ announcement, you have 8
seconds to enter your security code. You can
then delete messages, see ‘To delete messages’,
page 10.