Page | 15
Other Hidden AutoSync Features
Window control
– This function allows you to open and close the side windows via remote keyfob.
First,
be sure that the “remote window operation” is set to “ON” in the factory radio/nav settings.
From the
factory radio home screen, press the settings icon, then “vehicle”, then “remote lock, unlock, start”,
then “remote window operation”, set to ON.
-To open all of the windows while the truck is off, hold the “UNLOCK” button on the remote keyfob.
-To close all of the windows while the truck is off, hold the “LOCK” button on the remote keyfob.
NOTE: sunroof open/close and rear sliding window open/close is NOT supported by remote control
NOTE: Just as with the strobe lights feature, this requires the BCM unlock to work on 2017+ vehicles.
See top of page 6 for details!
Video override
– AutoSync can disable the factory video lockout features that prevent use while the
vehicle is not in Park. To activate this, be sure the vehicle is in Drive, and press-hold the cruise control
ON/OFF button for approximately 4 seconds. You will hear a chime and a “Video In motion active!”
message will pop up on the screen for several seconds and then self-clear. The video lockout will then be
disabled. You must re-initiate this override function every time the vehicle is restarted or shifted back
into park. Unfortunately, navigation destination entry function is not able to be overridden by AutoSync.
THIS FUNCTION IS ILLEGAL TO USE ON PUBLIC ROADWAYS. DISTRACTED DRIVING CAN BE DEADLY TO
YOURSELF AND INNOCENT BYSTANDERS!!!!
Radio / HMI VIN clear –
AutoSync has the ability to clear and reset the VIN lock on both radios and HMI
modules. This is useful if you are swapping/replacing HMI modules or radios. The dealer cannot clear the
VIN on these modules, this is an AutoSync-exclusive!
When a new radio or HMI module is installed, the radio screen will be black with a “theftlock” message.
To unlock the radio and HMI module, start with the key on engine off, AutoSync plugged in. Press the
accelerator pedal to the floor and hold it. While still holding the accelerator pedal, press and hold the
brake pedal. While holding the brake and accelerator pedal, press and hold the cruise control set/coast
button. Within a second or two, the radio screen will show “NO VIN”. When the radio screen shows “NO
VIN”, release the pedals and cruise control button. The radio will then reset and the normal home
screen will return. Cycle the key OFF for 30 seconds, then cycle the key back on, and the radio/HMI
module will now have your trucks VIN stored.