Page | 14
-Engine Data Acquisition mode. There are two different methods of polling the ECM to read live data.
Dynamic is preferred because it allows faster data reading/display, however it might have compatibility
issues if you are using the AutoSync on an OBD splitter with another scan tool (Edge CTS, Ez Lynk, Banks
etc). If you are using the AutoSync simultaneously with another scan tool device and the readings on
one or both devices are erratic or corrupted, try switching the Engine Data setting to “Mode-22”.
-Auto Work Lights. This setting adds a feature that will automatically turn on your cargo/bed lights when
you unlock your truck with the keyfob at night. This can be helpful to provided extra exterior
illumination in addition to the vehicle’s factory approach lighting (headlights, reverse lights, etc).
NOTE:
Just as with the strobe lights feature, this requires the BCM unlock to work on 2017+ vehicles. See top
of page 6 for details!
TC Lockup Controller
–This is found on page 4 of the AutoSync main menu. This menu option is only
visible/accessible with engine running.
The lockup controller has two modes: automatic and manual. Automatic mode will automatically
immediately force lock the torque converter whenever the accelerator pedal is greater than 95%,
vehicle speed is above “X” mph, engine speed is over “X” rpm, and the transmission is in “X” gear.
“X” are user-adjustable variables found in the “AutoSync Settings – TC Lockup Config” menu.
Manual mode allows the user to have full manual control of the torque converter lockup, as long as the
vehicle speed is above 25mph and the brake pedal is NOT applied. When in manual mode, press the
cruise control ON/OFF button to force-lock the converter. Press the cruise control CANCEL button to
force-unlock the converter
. If the brake pedal is applied, the lockup controller function is canceled.
To select auto or manual mode:
press the “Mode” icon button on the bottom of the screen. The lockup
controller “AUTO” mode can be used any time, on the street or track. The “MANUAL” mode should only
be used on the race track/sled pull track. To disable the lockup controller function, press “off”
NOTE: You can also arm/enable the lockup controller using this shortcut: press/hold the tow/haul
button for several seconds until you hear a chime.
Module Programming
– Custom BCM tuning is available as an extra-cost upgrade. BCM tuning can
add/modify hundreds of extra awesome features such as remote start time extend, disable door chime,
disable LED turn signal hyperflash, speed limiter adjust, cargo light while driving, modify door lock
settings, modify night time approach/exit lighting settings, auto headlight settings, wiper settings, etc.
BCM tuning can be purchased here (downloads to AutoSync over WiFi): www.whiteautoandmedia.com