Page | 10
control events. Repeatedly/continuously using launch control MAY cause premature wear on
the ABS pump motor and solenoid valves.
Performance Timer
– This feature is found on AutoSync main menu, page 3. This function allows the
user to measure the vehicles 0-60mph time. Follow the on-screen instructions to use the feature. If the
vehicle is moving, the status will show
“NOT READY”.
When the vehicle is completely stopped and the
timer is ready to begin, the status will show
“READY”.
As soon as the vehicle starts moving, the timer
will begin counting and the status will show
“RUNNING”
. When the vehicle hits 60mph, the status will
show
“COMPLETE”,
and the 0-60mph time will be displayed on the screen. The AutoSync will
automatically store the fastest time, and this time will be saved even if the AutoSync is unplugged. If a
faster 0-60mph time is accomplished, the AutoSync will automatically update the saved “Best time”. To
clear the “best time” records and reset the value to the default max time (65.54 seconds, computer
nerds will get this, ha), press the
“Clear Records”
icon.
NOTE: This test will only be accurate if your tire size is set correctly! If you have larger-than-stock tires
and your ECM tune/speedometer has not been corrected for the larger size tires, this 0-60mph time
will be inaccurate. Using GPS, verify that your speedometer is correct to ensure accurate results.
Vehicle Setup
– This is a sub-menu found on page 3 of the AutoSync main menu. This sub-menu
contains several vehicle-related setup and configuration options:
-Learn new keyfobs (only for vehicles with keyed ignition, does not work on push-button-start vehicles)