BST Solutions GmbH | UV COMPACT FLAME DETECTOR IFC 10
Page 18
4.6 Connection
4.6.1 Electrical connection
For connection data, please refer to the chapter titled „Technical data“ as well as to the fol-
lowing terminal diagram.
Ensure that the available supply voltage complies with the voltage indicated on the type plate.
Prior to connection, check the device and the connecting cables for visible damage.
4.6.2 Connection diagram IFC 10
4.7 Storage
Do not unpack any packed compact flame detektor IFC 10 and accessories.
The following conditions apply to storage:
• Store in a dry place. Maximum relative humidity 95 %. Non condensing.In addition, it has
to be assured that the floor in the storage area will remain dry throughout the storage period.
• Protect from direct sunlight. Storage temperature:
0 °C - 50 °C.
• Store in a dustfree location.
• Avoid mechanical vibrations and damage.
Danger to life caused by electrical current!
The safety instructions and local safety regulations have to be observed during
connection!
DANGER
!
TRANSPORT, INSTALLATION AND CONNECTION
PIN
Internal
connection
AC/DC
Cable number
Connection for
ionization output / LDR
1
L
1
L
2
N*
2
N
3
NC
-
-
4
NC
3
-
5
4
ION/LDR
6
NC
-
-
PE
PE
Green / yellow
PE
*internally connected to PIN 2
Occupancy male and female plug
