BSS Audio Prosys PS-8810, Руководство пользователя

Страница: 94 / 121

- 94 -
PS-8810
DIGITAL SIGNAL PROCESSOR
The PS-8810’s eight CobraNet Outputs can be assigned to be
transmitted on Slots in one of four CobraNet Bundles. The
CobraNet Outputs can accept audio from either the corresponding
‘B’ Input Processing Section or the corresponding AUX Output
Processing Section. Each of the eight CobraNet Outputs is then
assigned a Bundle and Slot position. Unlike the CobraNet Inputs,
the same CobraNet Output can go to more than one Bundle/Slot
position.
The ‘Unlink’ Button allows all of the Bundle/Slot assignments to be
disconnected, while the ‘Default Link’ Button allows assignment of
CobraNet Output 1 to Slot 1 of each Bundle, CobraNet Output 2 to
Slot 2 of each Bundle, and so forth.
Each Slot can be assigned either none, 16bit, 20bit, or 24bit
resolution. Each Bundle is limited in the number of audio ‘bits’ that
can be placed in a single Bundle and is a function of the maximum
Ethernet data payload. The ‘Max Packet Size’ meter tracks how
much room remains in the Bundle. Once the ‘Max Packet Size’
has been exceeded, additional data will not be allowed. As can be
seen in the figure above, seven 24bit Slots are allowed in TxC with
Slot 8 not active, while TxD allows all eight slots if three are 20bit.
CobraNet
®
Output
Output