BSS Audio
DPR-402 User Manual v3.0
Page 28
In this mode, it is important that the compressor controls are set identically for all
channels.
Improved Stereo Coupling
In this mode, only the controls on Channel 1 compressor will be required to
control both channels, as the control signal for channel 1s VCA is used to drive
that on channel 2. This gives excellent stereo matching without the need to adjust
both sets of compressor controls. Two 10k ohm, ¼ watt, 1% resistors are required
to sum the left and right signals into channel 1 CONTROL S/C RETURN input.
