BSS Audio
DPR-402 User Manual v3.0
Page 9
5 Earthing Requirements
WARNING! THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in the mains lead are colour coded in accordance with
the following code.
Green and Yellow......Earth
Blue......Neutral
Brown......Live
As the colours of the wires in the mains lead may not correspond with the
markings identifying the terminals in your plug, proceed as follows.
•
The wire which is coloured Green and Yellow or Green must be connected to
the terminal which is marked with the letter ‘E’ or by the Earth signal or which is
coloured Green and Yellow or Green.
•
The wire which is coloured Blue must be connected to the terminal labelled ‘N’
or coloured Black or Blue.
•
The wire which is coloured Brown must be connected to the terminal labelled
‘L’ or coloured Red or Brown.
Those units supplied to the North American market will have an integral moulded
3 pin connector which is provided to satisfy required local standards.
The mains voltage selector switch provides a simple external adjustment to allow
operation on all international AC power standards. The allowable ranges for the
supply voltage are:
90VAC up to 132VAC on the 115V position and
190VAC up to 264VAC on the 230V position.
Outside these ranges the unit will not work satisfactorily, if at all. Voltages in
excess of the maximum will probably cause damage. Voltages below the minimum
will cause the power supplies to drop out of regulation, degrading the performance
of the system.
6 Unpacking
As part of BSS' system of quality control, this product is carefully inspected before
packing to ensure flawless appearance.
After unpacking the unit, please inspect for any physical damage and retain the
shipping carton and ALL relevant packing materials for use should the unit need
returning.
In the event that damage has occurred, please notify your dealer
immediately
, so
that a written claim to cover the damages can be initiated.
