1 – Sound1
yes
2 – Sound2
no
3 – Sound3
no
4 – Sound4
no
5 – Chirps1
yes
6 - Chirps2
no
7 – Chirps3
no
8 – Long blinkers
no
9 - Repeated self-activation
no
10 - Passive arming
no
11 - Current sensor
yes
12 - Warning for door ignoring
yes
13 - Double code
yes
14 - Disabling the immobilizer
no
cal installation or the battery, which are leading to a fake produce of the current sensor. Due to
that the client can turn on the alarm of the car in special mode without running the risk of fake
produces.
Additional channel
The pressing of button N3 activates the additional channel for the term of buttons‘ pressing, and
supplies GNDl (up to 0.5A). If the system is in armed mode both shock and the current sensor
are ignored (inactivated) for 30sec. The channel can be activated also by functions #17 and #18.
Learning mode of a new remote transmitter
Press and hold the service (VALET) button. The car ignition should be switched on and off 4
times, the system produces a signal and enters the learning mode, release the service button.
Then press twice a button of the remote control transmitter that should be ‘learned”, in that way
you have learned it, the system produces a signal for disarming. If you want to erase all remote
control transmitters, on entering the learning mode don‘t release the service button- after 10
seconds the system emits one signal and all remote control transmitters are erased - the system
4
9
4
9
1 – Sound1
yes
2 – Sound2
no
3 – Sound3
no
4 – Sound4
no
5 – Chirps1
yes
6 - Chirps2
no
7 – Chirps3
no
8 – Long blinkers
no
9 - Repeated self-activation
no
10 - Passive arming
no
11 - Current sensor
yes
12 - Warning for door ignoring
yes
13 - Double code
yes
14 - Disabling the immobilizer
no
cal installation or the battery, which are leading to a fake produce of the current sensor. Due to
that the client can turn on the alarm of the car in special mode without running the risk of fake
produces.
Additional channel
The pressing of button N3 activates the additional channel for the term of buttons‘ pressing, and
supplies GNDl (up to 0.5A). If the system is in armed mode both shock and the current sensor
are ignored (inactivated) for 30sec. The channel can be activated also by functions #17 and #18.
Learning mode of a new remote transmitter
Press and hold the service (VALET) button. The car ignition should be switched on and off 4
times, the system produces a signal and enters the learning mode, release the service button.
Then press twice a button of the remote control transmitter that should be ‘learned”, in that way
you have learned it, the system produces a signal for disarming. If you want to erase all remote
control transmitters, on entering the learning mode don‘t release the service button- after 10
seconds the system emits one signal and all remote control transmitters are erased - the system
