15 – Locking time (3.5/0.7сек )
no
16 - Long lock
no
17 - Channel for windows roll-up
no
18 - Pager channel
no
19 - Locking on ignition switching on
no
20 - Locking on passive arming
yes
21 - Double unlocking
no
22 - Disabling the current sensor in Special mode no
If the function is switched off the LED lights on for a short interval and if it is switched on- the
LED lights off for short. Function switching on is done with N1 and its switching off - with N2. A
single function can be swithed on and off repeatedly, and the next function follows by short turn
-
ing the ignition key on - the system emits one signal. If you hold the ignition key on for more than
3 sec., the system exit the pragromming mode. After function #22 or if you stay at one and same
function for more than 30 sec, the system also leaves the programming mode by producing 3
signals.
18. Pager channel - if the function is enabled and the channel is activated, when the system
alarms, without warning - it is used for activation of additional devices - pager or GSM module.
The activation by pressing button N3 proceeds in the same way - the device can be tested with
-
out alarming. If function#17 is enabled, both functions #17 and#18 work together - the additional
channel will be activated in the test time and by the siren - that‘s why if it is necessary to use one
of #17 or #18 functions.
19. Locking on turning the ignition on - in activation of this function the system gives a locking
impulse on turning the ignition on and gives unlocking impulse on turning the ignition off.
20. Locking on passive arming - if the function is disabled the system will not give a locking im
-
pulse on passive arming (func=#10)but locks the car on arming by the remote control transmitter
or by fuction #9. This function avoids the locking of your keys inside the car, but decreases the
reliability.
21. Double unlocking - this function allows generating two impulses when unlocking. It is used in
cars in which the first impuls unlocks only the drivers’ door, and the second all others.
22. Disabling the current sensor in Special mode - when this function is allowed the currens
sensor does not work in special mode - it is used when the car has problems with the electri
-
5
8
5
8
15 – Locking time (3.5/0.7сек )
no
16 - Long lock
no
17 - Channel for windows roll-up
no
18 - Pager channel
no
19 - Locking on ignition switching on
no
20 - Locking on passive arming
yes
21 - Double unlocking
no
22 - Disabling the current sensor in Special mode no
If the function is switched off the LED lights on for a short interval and if it is switched on- the
LED lights off for short. Function switching on is done with N1 and its switching off - with N2. A
single function can be swithed on and off repeatedly, and the next function follows by short turn
-
ing the ignition key on - the system emits one signal. If you hold the ignition key on for more than
3 sec., the system exit the pragromming mode. After function #22 or if you stay at one and same
function for more than 30 sec, the system also leaves the programming mode by producing 3
signals.
18. Pager channel - if the function is enabled and the channel is activated, when the system
alarms, without warning - it is used for activation of additional devices - pager or GSM module.
The activation by pressing button N3 proceeds in the same way - the device can be tested with
-
out alarming. If function#17 is enabled, both functions #17 and#18 work together - the additional
channel will be activated in the test time and by the siren - that‘s why if it is necessary to use one
of #17 or #18 functions.
19. Locking on turning the ignition on - in activation of this function the system gives a locking
impulse on turning the ignition on and gives unlocking impulse on turning the ignition off.
20. Locking on passive arming - if the function is disabled the system will not give a locking im
-
pulse on passive arming (func=#10)but locks the car on arming by the remote control transmitter
or by fuction #9. This function avoids the locking of your keys inside the car, but decreases the
reliability.
21. Double unlocking - this function allows generating two impulses when unlocking. It is used in
cars in which the first impuls unlocks only the drivers’ door, and the second all others.
22. Disabling the current sensor in Special mode - when this function is allowed the currens
sensor does not work in special mode - it is used when the car has problems with the electri
-
