QM-Nr: FB_BMA_01-R-0804engl_3
Erstellt/
Prepared
: am/
on:19/11/2015
Genehmigt/
Approved: am
/
on19/11/2015
5 / 16
by ROFI S.A.R.L.
2.1. Marking
Additional to the marking according to EN 19, the nameplate on the product is containing the following
information:
•
Name of manufacturer
•
Type
•
Epsilon in hexagon
•
II 2G c X T
2
)
•
CE-Mark
2
) The highest surface temperature of the valve is given by the fluid and by the existing ambient temperature and has
to be defined by the end-user.
Letter X:
The end-user has to mention the highest surface temperature of the unit in relation to the highest temperature of the
fluid clearly on the valve’s nameplate.
By marking the product with the CE-mark we declare the conformity with the European Pressure
Equipment Directive 97/23/EG.
By marking these products of group II - belonging to the product-category 2G referring to chapter II article
8 according to Directive 94/9/EG - with the EX mark, we declare the conformity with the ATEX Directive
94/9 EG for the use in hazardous areas.
2.2. Notes on possible dangers
2.2.1. Significance symbols and explanatory notes on safety information
In these Operating and Installation Instructions dangers, risks and items of safety information are
highlighted to attract special attention. Information marked with the above symbol and
“ATTENTION!”
describe practices, a failure to comply with which can result in serious injury or danger of death for users
or third parties or in material damage to the system or the environment. It is vital to comply with these
practices and to monitor compliance. All other information not specifically emphasised such as transport,
installation, operating and maintenance instructions as well as technical data (in the operating instructions,
product documentation and on the device itself) must also be complied with to the fullest extent in order to
avoid faults which in turn can cause serious injury to persons or damage to property.
ATTENTION
!
Warning of general danger
