Brush Bandit 1290XP, Инструкция по эксплуатации и каталог запасных частей

Страница: 61 / 140

Bandit
Copyright 12/07 PAGE
MODELS 1290XP/1590
CHECK CHIPPER DRUM ASSEMBLY FOR
CONDITION OF KNIFE BOLT THREADS,
SECURE WELDS, TORQUED BOLTS,
EXCESSIVE WEAR AND IMPACT CRACKS.
IF PROBLEM FOUND CONTACT CHIPPER
MANUFACTURER, OR AUTHORIZED CHIPPER
DEALER.
WHEN YOU CHANGE CHIPPER KNIVES
WARNING
MAINTENANCE SECTION
YEARLY CHECK LIST
1) Change hydraulic oil and flush the hydraulic tank.
2) Replace hydraulic suction screen(s) annually or every 2000 hours.
O.K. Repaired
MONTHLY CHECK LIST
1) Check towing hitch for wear, keep pintle ring greased.
2) Check discharge, and infeed hopper for wear.
3) Inspect feedwheel motor connection.
4) Check feedwheel teeth for sharpness.
5) Check, retighten all bearing and chipper sheave bolts.
6) Check and fill tires to rated pressure.
7) Check hydraulic function pressures. Set to specified PSI (bar).
8) Check and grease or oil wheel bearings, follow axle MFG. instructions.
9) Check and adjust brakes, follow axle MFG. instructions.
10) Lubricate “Bandit” lever throttle cable.
O.K. Repaired
WEEKLY CHECK LIST
1) Check anvil clearance, tightness, and wear.
2) Check alternator and fan belts on engine.
3) Check spring tension on easy climb system.
4) Check and retighten wheel lug nuts.
5) Check and retighten fuel tank and hydraulic tank mount bolts.
6) Lubricate pivoting and hinged areas (i.e. control handle, discharge flipper, etc.)
7) Use a dry lube on any chain driven component.
8) Check feedwheel slide box is working smoothly and oil.
O.K. Repaired
3 MONTH CHECK LIST
1) Replace hydraulic filter(s) after first 10 hours then quarterly or every 400 hours.
2) Grease swivel plates for discharge as needed.
3) Replace high pressure oil filter(s) (if equipped) after first 10 hours then
quarterly or every 400 hours.
O.K. Repaired