Bruker 500'89 Ascend Aeon Скачать руководство пользователя страница 24

Страница: 24 / 100

ZTKS0172 / Z31964 / 04

Safety

2.6

Description of Signs and Labels

Signs and labels are always related to their immediate vicinity. The following signs and
labels are found on the magnet system and in the vicinity.

Prohibition sign: No person with pacemakers!

People with pacemakers are endangered in the identified area of 0.5 mT (5 Gauss) and
are not allowed to enter these areas.

Prohibition sign: No person with implants!

People with metallic implants are endangered in the identified area of 0.5 mT (5 Gauss)
and are not allowed to enter these areas.

Prohibition sign: No watches or electronic devices!

Watches and electronic devices may be damaged in the identified area of 0.5 mT
(5 Gauss).

Prohibition sign: No credit cards or other magnetic memory!

Credit cards and magnetic memory may be damaged in the identified area of 0.5 mT
(5 Gauss).

Prohibition sign: Do not touch! Do not block!

Do not touch or block the identified area.

Hazard warning sign: Strong magnetic field!

• No magnetic memory.

• No jewelry.

• No metallic items.

Helium fill-in port

• Use only this port for helium refill!

• Do not leave the helium ports open for more than 5 seconds!

Emergency exit!

• Always keep the emergency exit clear.

• Follow the arrows if necessary.

• Doors must pushed open in escape direction.

Содержание 500'89 Ascend Aeon





































































































Результаты поиска

Содержание 500'89 Ascend Aeon

Отзывы:

Похожие инструкции для 500'89 Ascend Aeon

Бренды по названию

Популярные бренды

Bruker 500'89 Ascend Aeon, Руководство пользователя

Результаты поиска

Содержание 500'89 Ascend Aeon

Отзывы:

Похожие инструкции для 500'89 Ascend Aeon

Бренды по названию

Популярные бренды