BRUEL & KJAER PULSE 7788, Техническая документация инструкция

Страница: 14 / 62

PULSE Vehicle Pass ‐ by Test Systems – Installation Manual 8
Speed Sensor Options
Besides using the radar system listed above, you can use other options for precision
speed measurement such as laser devices or precision GPS units. In all cases, it is required
that the speed measurement be delivered as a TTL pulse train with the measured speed
proportional to the frequency of the output pulse train.
2.2.2 Accessories
The following accessories to standard and optional components are available:
WQ-3208: 2-channel Telemetry
System, includes transmitter and
receiver
For systems where there is a need
for vehicle parameters such as
engine RPM, throttle position
*
or
vehicle speed
WQ-2410: Cigarette Lighter Power
Splitter
Allows power for both the
telemetry system and in-vehicle
sensor to be acquired from the
cigarette lighter
* Requires separate 9 – 12 volt power supply and a BNT connection
UA-1522: Tripod for radar For use with radar system
WQ-1185: Cable Drum Extension for radar For use with radar system
WL-1391-D-xxx
*
: Drum with coaxial BNC to BNC Cable
* Where D is decimetres and xxx is the length. Available as -D-600, 400 and 200 (60, 40, and 20 m, (196.8, 131.2, and
65.6 ft))
For use with microphones
Component Description