8
SNUG-manual-EN-1-6 July 2019
Reserve Parachute Installation
We recommend that a qualified professional should always perform the installation and re-packing of the reserve
parachute.
The reserve pocket on the SNUG is suitable for reserve parachutes up 7,500cm
3
volume.
If it is not possible to connect the harness reserve handle to the loops on the parachute deployment bag inside the
pocket, please consult your supplier who may be able to supply an alternative deployment bag. Loops can be sewn at
an appropriate place on any deployment bag, but only a qualified person should carry this out.
WARNING!
After installation of a reserve parachute in the harness, it is absolutely essential to do a simulated deployment under a
static swing, ensuring that the parachute release system operates correctly and the parachute comes out easily. The
cords which close the reserve pocket must be checked regularly. If the cord is worn, it must be replaced. Each time a
reserve parachute is installed, check that the cord is in good order by applying a load of 10kg.
Before each flight, check that the plastic rods and handle are located correctly.
The magnetic keeper on the reserve handle helps keep the reserve handle in place for transportation. It should be
opened for flight, to make it easier to throw the reserve if necessary.
Reserve Parachute
Installation
