9
SNUG-manual-EN-1-6 July 2019
Connect the reserve handle to the
reserve with a larksfoot knot to the
middle loop on a side. Ensure that
the strap is long enough to allow the
plastic rods to be pulled out first.
Using the lines provided (located in the rear pocket), thread both eyelets in
sequence using the printed numbers for guidance.
Insert the reserve with the handle
attachment facing the seat board and
the lines straight underneath.
Attach the harness bridles to the
parachute’s bridle using a suitable
connector (not supplied).
Reserve Parachute
Installation
Put the handle inside the neoprene
cover.
