BRP Can-Am Traxter HD7 2022, Руководство оператора

Страница: 83 / 196

81
D DR RIIV VIIN NG G A AIID D T TE EC CH HN NO OL LO OG GIIE ES S
These systems actively manage brak-
ing and traction.
Under certain conditions, the driver
may feel the actions taken by the sys-
tems in the form of vibrations or slight
jerks in the steering wheel or brake
pedal, which is normal.
A AB BS S ((A An nttii--L Lo occkk B Brra akke e
S Syysstte em m))
This system prevents the wheels from
locking during braking, which im-
proves the stability of the vehicle and
the contact of the tires on the ground.
L Liim miitta attiio on nss:: Low tire adhesion to the
surface limits the braking ability. Even
with ABS, the braking distance will be
longer under the conditions of low
adhesion.
B BT TC C ((B Brra akke e T To orrq qu ue e C Co on nttrro oll))
When front or rear wheel slippage is
detected, BTC automatically transfers
torque to the wheel providing better
traction.
D DT TC C ((D Drra ag g T To orrq qu ue e C Co on nttrro oll))
During deceleration, this system pre-
vents the wheels from slipping due to
the engine brake by requesting a light
and limited engine torque request.
When in 4WD mode, the DTC will be
more noticeable eliminating most en-
gine braking. This ensures proper
ABS system operation.
W WA AR RN NIIN NG G
U Un niitt m mo od diiffiicca attiio on n,, ssu ucch h a ass ffiittttiin ng g a a
d diiffffe erre en ntt ttiirre e m mo od de ell a an nd d//o orr ssiizze e,,
m ma ayy cca au usse e u un nw wa an ntte ed d ssyysstte em m b be e--
h ha avviio orr ssu ucch h a ass u un nd de err o orr o ovve errrre ea acc--
ttiio on n o off tth he e a ab bo ovve e ssyysstte em m..
H HH HC C ((H Hiillll H Ho olld d C Co on nttrro oll))
When the brake pedal is applied as to
hold the vehicle stationary, HHC auto-
matically detects if the vehicle is on a
slope and momentarily holds brake
pressure to ensure the vehicle does
not roll down while moving the foot
from the brake pedal to the accelera-
tor pedal.
H HD DC C ((H Hiillll D De esscce en ntt C Co on nttrro oll))
HDC controls the vehicle speed in
down hill situation by applying and
modulating the brake pressure to hold
the target speed set by the driver. The
driver can change the set speed by
pressing the accelerator or brake
pedal.
HDC can be activated and deacti-
vated by pressing the HDC button.
Refer to Secondary Controls for com-
plete instructions.